Spa Clear Ultra - Sanitiser

Directions For USE:

6g per 1,000L every second day

These dosage rates are only a guide to achieve the required level of free chlorine.

DO NOT exceed a concentration of 50mg/L of isocyanurate

NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION GENERAL INSTRUCTIONS:

• The correct level of free chlorine should be maintained for several hours before and during swimming activity.
• Chlorine levels and pH should be tested weekly by use of a reliable test kit using fresh testing reagents.
• If pH falls below the required level add SPA FRESH ULTRA*" pH & ALKALINITY UP, if it rises above add

SPA FRESH ULTRA** pH DOWN.

• Dose pool in the evening when pool is not in use
• Stabiliser levels MUST be tested fortnightly by your local pool shop or by use of a reliable test kit.

Once stabiliser levels reach 50mg/L DO NOT use this product until stabiliser levels fall below that level.

INSTEAD use an unstabilised chlorine product to maintain free chlorine levels. If 50 mg/L of stabiliser is exceeded the ability of the chlorine to control algae and bacteria is reduced.

• UNDER NO CIRCUMSTANCES should stabiliser levels be allowed to exceed 100 mg/L. If stabiliser concentration needs to be reduced consult your local Just Spas retailer.